onda
30-12-07, 01:15
================================================== =======
1.5.2-CS Beta
================================================== =======
+ implementata la comunicazione via seriale con applicazioni esterne:
- per il momento è supportato solamente il protocollo PoG;
- aggiunto menu pers/4/5: configurazione seriale;
- Il CS si può disabilitare andando su un ch free e cambiando l'impostazione della seriale su nessun device. l'emu interno ricomincia a funzionare;
- attualmente, con cs attivo, solo i biss-cotti funzionano in emulazione;
- possibilità di impostare sulla seriale il tempo in decimi di secondo di attesa della dw dal gbox, un buon valore dovrebbe essere (25), ognuno lo adeguerà alla velocità di risposta del proprio sistema cs (locale o di internet);
- Se il tempo di attesa impostato è troppo basso, si rischia che il bbox invii una sequenza di due ecm relativi a pid_ecm diversi e che la dw inviata dal gbox si riferisca al penultimo ecm; il bbox crederebbe di aver trovato nell'ultimo pid_ecm quello corretto, ma così non sarebbe!;
- se il gbox non invia dw, il firm continua ad inviare ecm sperando di ottenere risposta;
- quando nel bbox non è scelto nessun pid_ecm preferito (caso tipico quando si uppa una nuova lista ch) viene agganciato in automatico;
- il pid_ecm corretto (o l'ultimo utilizzato) viene salvato in tcs;
- aggiunte informazioni nel menù "+" (emu status) mentre usa device esterno;
- si consiglia di non effettuare zapping frenetico durante il funzionamento del PoG in quanto si potrebbero verificare blocchi nella comunicazione;
- per info sul funzionamento consultare la guida (Guida bBox 1.5.2-CS Beta");
+ modificato il pannello della gestione canale (tasto "A");
+ fix programmazione registrazioni (funziona tutto bene se il ch da registrare lo si digita da tastiera del telecomando, se lo si sceglie con il tasto "E" non sempre funziona;
+ fix provider 05xx (MECM61);
+ fixato un piccolo bug del tasto cerca;
+ fix bug minori;
Particolari ringraziamenti vanno a Photos of Ghosts che ci ha dato la possibilità di utilizzare il suo protocollo PoG;
a Tideglo per un bug su ndz e una dritta sulla gestione N2;
e un grazie va anche al supporto dei betatester;
Si coglie l'occasone per augurare un buon anno a tutti!
thxt
NKDevTeam
1.5.2-CS Beta
================================================== =======
+ implemented the communication by seriale with external applications:
- for the time being the protocol PoG is only supported;
- adds menu pers/4/5: configuration seriale;
- The CS can be disabled going on a ch free and changing the formulation of the seriale on any devices. the inside emu restarts to work;
- currently, with active cs, only the biss-cooked ones work in emulation;
- possibility to plan on the seriale the time in tenth of second of attended of the dw by the gbox, a good value you/he/she should be (25), each will adjust him/it to the speed of answer of his/her own system cs (local or of internet);
- If the time of attended planned it is too low, he risks that the bbox sends a sequence of two ecms related to different pid_ecm and that the dw sent by the gbox refers to the next to last ecm; the bbox would believe to have found in the last pid_ecm that correct, but so would not be!;
- if the gbox doesn't send dw, the firm continues to send ecm hoping to get answer;
- when in the bbox it is not select any pid_ecms preferred (typical case when him uppa a new list ch) you/he/she is hooked in automatic;
- the correct (or the last used) pid_ecm is saved in tcs;
- added information in the menù "+" (emu status) while it is using external device;
- it recommends him not to effect frantic zapping during the operation of the PoG in how much blocks could be verified in the communication;
- for info on the operation to consult the guide (Guide bBox 1.5.2-CS Beta");
+ modified the panel of the management channel (*** "To");
+ fix planning recordings (everything works well if the ch to record him to it ***board digita of the remote control, if it is chosen him/it with the *** "And" not it always works;
+ fix provider 05xx (MECM61);
+ fixato a small bug of the *** looks for;
+ fix smaller bug;
Particular thanks go to Photos of Ghosts that has given us the possibility to use its protocol PoG;
to Tideglo for a bug on n*z and a right-hand on the management N2;
and a thanks it also goes to the support of the betatesters;
You gathers the occasone to wish a good year everybody!
thxt
NKDevTeam
UPLOAD......http://www.orbitfiles.com/download/id2419746296.html
1.5.2-CS Beta
================================================== =======
+ implementata la comunicazione via seriale con applicazioni esterne:
- per il momento è supportato solamente il protocollo PoG;
- aggiunto menu pers/4/5: configurazione seriale;
- Il CS si può disabilitare andando su un ch free e cambiando l'impostazione della seriale su nessun device. l'emu interno ricomincia a funzionare;
- attualmente, con cs attivo, solo i biss-cotti funzionano in emulazione;
- possibilità di impostare sulla seriale il tempo in decimi di secondo di attesa della dw dal gbox, un buon valore dovrebbe essere (25), ognuno lo adeguerà alla velocità di risposta del proprio sistema cs (locale o di internet);
- Se il tempo di attesa impostato è troppo basso, si rischia che il bbox invii una sequenza di due ecm relativi a pid_ecm diversi e che la dw inviata dal gbox si riferisca al penultimo ecm; il bbox crederebbe di aver trovato nell'ultimo pid_ecm quello corretto, ma così non sarebbe!;
- se il gbox non invia dw, il firm continua ad inviare ecm sperando di ottenere risposta;
- quando nel bbox non è scelto nessun pid_ecm preferito (caso tipico quando si uppa una nuova lista ch) viene agganciato in automatico;
- il pid_ecm corretto (o l'ultimo utilizzato) viene salvato in tcs;
- aggiunte informazioni nel menù "+" (emu status) mentre usa device esterno;
- si consiglia di non effettuare zapping frenetico durante il funzionamento del PoG in quanto si potrebbero verificare blocchi nella comunicazione;
- per info sul funzionamento consultare la guida (Guida bBox 1.5.2-CS Beta");
+ modificato il pannello della gestione canale (tasto "A");
+ fix programmazione registrazioni (funziona tutto bene se il ch da registrare lo si digita da tastiera del telecomando, se lo si sceglie con il tasto "E" non sempre funziona;
+ fix provider 05xx (MECM61);
+ fixato un piccolo bug del tasto cerca;
+ fix bug minori;
Particolari ringraziamenti vanno a Photos of Ghosts che ci ha dato la possibilità di utilizzare il suo protocollo PoG;
a Tideglo per un bug su ndz e una dritta sulla gestione N2;
e un grazie va anche al supporto dei betatester;
Si coglie l'occasone per augurare un buon anno a tutti!
thxt
NKDevTeam
1.5.2-CS Beta
================================================== =======
+ implemented the communication by seriale with external applications:
- for the time being the protocol PoG is only supported;
- adds menu pers/4/5: configuration seriale;
- The CS can be disabled going on a ch free and changing the formulation of the seriale on any devices. the inside emu restarts to work;
- currently, with active cs, only the biss-cooked ones work in emulation;
- possibility to plan on the seriale the time in tenth of second of attended of the dw by the gbox, a good value you/he/she should be (25), each will adjust him/it to the speed of answer of his/her own system cs (local or of internet);
- If the time of attended planned it is too low, he risks that the bbox sends a sequence of two ecms related to different pid_ecm and that the dw sent by the gbox refers to the next to last ecm; the bbox would believe to have found in the last pid_ecm that correct, but so would not be!;
- if the gbox doesn't send dw, the firm continues to send ecm hoping to get answer;
- when in the bbox it is not select any pid_ecms preferred (typical case when him uppa a new list ch) you/he/she is hooked in automatic;
- the correct (or the last used) pid_ecm is saved in tcs;
- added information in the menù "+" (emu status) while it is using external device;
- it recommends him not to effect frantic zapping during the operation of the PoG in how much blocks could be verified in the communication;
- for info on the operation to consult the guide (Guide bBox 1.5.2-CS Beta");
+ modified the panel of the management channel (*** "To");
+ fix planning recordings (everything works well if the ch to record him to it ***board digita of the remote control, if it is chosen him/it with the *** "And" not it always works;
+ fix provider 05xx (MECM61);
+ fixato a small bug of the *** looks for;
+ fix smaller bug;
Particular thanks go to Photos of Ghosts that has given us the possibility to use its protocol PoG;
to Tideglo for a bug on n*z and a right-hand on the management N2;
and a thanks it also goes to the support of the betatesters;
You gathers the occasone to wish a good year everybody!
thxt
NKDevTeam
UPLOAD......http://www.orbitfiles.com/download/id2419746296.html